Timber veranda kit review: the Anton in Douglas fir with a flat roof, curved braces and front overhang
What we like
Real timber joints. Mortise and tenon and halving joints, fixed with timber pegs. They are stronger than screws.
Always made to measure. Any size is possible. The calculator shows standard options as a starting point, not a limit.
A clear kit. After you order you get a digital drawing and a 3D animation to check. Then everything arrives numbered.
Room to grow. You can add roof boarding, walls, sliding panels or steel doors later.
Douglas fir or oak. Oak is a little more durable and heavier, with a richer look. Douglas fir costs less and is easier to work.
The downsides
Long lead time. Made to measure takes about 8 weeks.
Keep it out of the ground. Douglas fir and oak are not suitable for ground contact, so never set the posts straight into the soil.
Douglas fir is a softwood. It is durability class 3 to 4. Resin can weep out, and the more sapwood in a piece, the shorter it lasts.
Oak moves. Oak can split and twist as it dries, and its tannin reacts with iron and stains. Always use stainless fixings.
Build it soon after delivery. Ideally put the frame up within 1 to 2 weeks and keep loose timber covered under a roof until then, or it can distort as it dries.
Who it suits, and who should skip it
A good fit for
Anyone who wants a traditional veranda with visible craftsmanship.
Gardens that need a bespoke size, including a lean to against the house.
Anyone planning to add walls, sliding doors or steel doors later.
Less suited to
Anyone who needs a veranda within a few weeks.
Anyone without a covered spot to store the timber for a short while.
Buyers looking mainly for the cheapest standard size.
Comparison: Douglas fir or oak
Douglas fir
Oak
Durability class
3 to 4
2
Character
lighter, easier to work
heavier, richer look
Watch out for
resin, sapwood
splitting while drying, tannin stains
Price, 15 x 15 cm posts
£2,464.08
£4,435.34
For a large, high end garden building we always use oak. For a good value veranda with the same joints and the same look, Douglas fir does the job well.
Mortise and tenon joint with timber pegs in Douglas fir, detail of the Anton veranda
Yes, as long as it stays out of the ground. Douglas fir is not suitable for ground contact but works well for heavy beams above it. It costs less than oak and is easier to work.
Can I change the size?
Yes, the Anton is always made to measure. The calculator starts from standard sizes, but you can ask for any dimension.
How long does delivery take?
About 8 weeks to the UK after you place your order.
The more you order, the more you save on delivery costs.
✅ Shipping in 2 days. Delivery time between 7 to 14 working days.
Free delivery in the UK from £4300.
Up to £4300 delivery charge of £250.
Promotion & information
* We always supply a construction kit. This means that you must cut and install all materials yourself.
* If you have ordered a fence, all fastening materials will be supplied, including clips and screws. The hardwood fence posts and all ipe slats are also included in the package.
* If you have ordered decking, all clips and screws are also supplied free of charge.
-> Important: do not forget to oil the wood on all four sides and do not leave unassembled wood (including during assembly) in the sun (purchase oil from us or treat with a similar product). Wood that has been screwed together correctly will almost never warp due to the clamping. Read carefully how to process wood on our website. This will prevent problems and allow you to enjoy your purchased product for a long time.